Why it is worth to invest money on Measuring and Verification of your equipment!

By |Published On: 2019-02-13|

Today huge amounts of money are invested in top of the line heat pumps, refrigeration and air conditioning systems, to save energy. But is this enough?

Sadly, it isn’t, and we repeatedly measure new (and old) equipment where 20‑30% energy is wasted. That is why we always recommend that ClimaCheck is installed from the start and used for the commissioning of your cooling system or heat pump, to ensure that it is optimised for your specific system, load and climate which is not the same as any other project. Thereafter, a structure for predictive maintenance should be established. 

The energy graph shown below is a top of the line installation of two chillers and two heat pumps that is supplying a new data center with cooling. The heat is delivered to a local district heating network.

Information from ClimaCheck Online

Yellow line – Outdoor temperature

Red bars – Energy consumption per 24 hours

Blue line – Energy consumption based on energy signature before optimisation (=predicted consumption)

Red line – Energy consumption based on energy signature after optimisation

Result – Savings of 2400 kWh/day (26% less energy consumption)

During the verification phase (see picture) another calibration was done and even more energy savings was possible. Today many companies focus is on state-of-the-art equipment and green energy which is good. But the possibility to save almost 30% energy is usually overlooked, many times due to challenges in the communication and lack in good way show the performance of the cooling systems and heat pumps.   

To measure is to know

Share this story!

Do you want news and upcoming events from ClimaCheck?

Fill out your information here.

More news

  • Glad Påsk önskar ClimaCheck!

    Vi passar på att önska er alla en riktigt glad påsk!

  • ClimaCheck 20 Years and New Logo!

    To celebrate our first 20 years, we take the opportunity to update our log. If you follow us on social media or subscribe to our newsletter, then you have probably already noticed the logo, as it has gradually made its appearance.

  • Gulf Engineering seminar – February highlight

    We want to extend a big thank, to ClimaCheck Partner, Gulf Engineering, for hosting a well-attended and arranged seminar that fostered engaging discussions and productive meetings.

Talk to a ClimaCheck specialist

Our proven solution increase energy efficiency by 10-30% and reduce maintenance costs in any air conditioning, refrigeration or heat pump system!