ClimaCheck EM24

Energy/Power Meter with display. Class B, DIN mounting, for Amp input or as other option for Rogowski and 333mV input

Product Documents

Information

Description

Three-phase energy analyzer with built-in configuration joystick and LCD data displaying; particularly indicated for active and reactive energy metering and for cost allocation. Housing for DIN-rail mounting with IP50 (front) protection degree. Direct connection up to 65A and by means of external current and
potential transformers.

Moreover the meter can be provided with digital outputs that can be either for pulse proportional to the active and reactive energy being measured or for alarm outputs. In alternative the RS485 communication port and 3 digital inputs or Dupline port and 3 digital inputs are available as
an option.

  • Class 1 (kWh) according to EN62053-21
  • Class B (kWh) according to EN50470-3
  • Class 2 (kvarh) according to EN62053-23
  • Accuracy ±0.5 RDG (current/voltage)
  • Energy analyzer
  • Instantaneous variables readout: 4 DGT
  • Energies/gas/water readout: 7+1 DGT
  • System variables: VLL, VLN, Admd max, VA, VAdmd
  • Admd max, W, Wdmd, Wdmd max, var, PF, Hz, Phase-sequence.
  • Single phase variables: VLL, VLN, A, VA, W, var, PF
  • Energy measurements: total and partial kWh and kvarh or based on different tariffs; single phase measurements
  • Gas, cold water, hot water, kWh remote heating measurements
  • Hour counter (6+2 DGT)
  •  TRMS measurements of distorted sine waves (voltages/currents)
  •  Self power supply (AV0-AV2-AV9 inputs)
  • Auxiliary power supply (AV5-AV6 inputs)
  • 3 digital inputs for tariff selection, DMD synch or gas/ water (hot-cold) and remote heating metering (on request)
  • 2 digital outputs for pulses or for alarms or as a mix of them (on request)
  • Dimensions: 4-DIN modules
  • Protection degree (front): IP50
  • RS485 serial output (on request) (MODBUS-RTU), iFIX SCADA
    compatibility