Knowledge
Case studies
45,000 sq.ft. Grocery Store
The estimated yearly energy consumption of the Refrigeration System is now approximately 654,000 kWh which represents an energy saving of approximately 123,000kWh per year (approximately 16% energy saving)
Supermarket, Portland, Oregon
Measurements supervised and analyzed by third party consultants over the following week, with similar climate conditions, proved that an energy saving of 25% had been achieved.
Banner Desert Medical Center
ETC Group conducted chiller testing using a portable ClimaCheck chiller analyzer at Desert Medical center on chillers 3, 5, and 6. Sections 2 and 3 include details for each measure
BD Medical Trane RTHD Chiller Test
This review is done by ClimaCheck staff in Sweden as a demonstration to visualise capabilities of ClimaCheck online when used to analyse and optimise refrigeration and air conditioning systems.
McKay Dee Medical Center
Intermountain Healthcare requested ETC Group to provide chiller plant testing and analysis using ClimaCheck on 3 chillers at the McKay Dee Medical Center.
Air conditioning inspections in UK
The measurements pinpointed that insufficient control of super heat at part-load operation was the cause of several earlier unexplained compressor failures.
Ice rink that heats the football pitch year round – absolutely free!
Thanks to a clever energy use strategy, waste heat from refrigerating the ice rink is used to heat the artificial turf football pitch. All measurement values are monitored and optimised with ClimaCheck.
Performance Analysis of Air-cooled chiller Carrier30RQ
This review is done by ClimaCheck staff in Sweden as a demonstration to visualise capabilities of ClimaCheck online when used to analyse and optimise refrigeration and air conditioning systems.
EWS “tune up” cuts energy losses and reduces carbon emissions
With FM managers under pressure to reduce emissions, energy consumption and maintenance bills. Eaton-Williams Service (EWS) has responded with an HVAC optimisation service to help customers maximise their plant’s efficiency.