ClimaCheck Energy Report

In a couple of days, you will see some updates on ClimaCheck online. If you have registered for the Energy report, you will also receive an updated version. 

The new ClimaCheck Energy Report gives a comprehensive status of the energy consumption of the system during the last quarter. It is sent in the beginning of every quarter.

Who to receive the information is configured in ClimaCheck online. If you have any questions regarding this, you can send an email to Support@ClimaCheck.com

In the report you can find the following information:

Distribution of Electrical Energy

The electrical energy distribution graph presents the relative energy consumption of the compressor and the auxiliary loads such as pumps and fans. The graph is helpful to illustrate the effect of the auxiliary loads on the overall energy consumption.

Electrical energy used and heating and cooling generated

The energy used and generated graph shows the consumed electrical energy by the compressor and the auxiliary units compared to the generated heating and cooling energy. On the electrical side there is a marking of the statistical signature consumption for this system over the selected quarter.

If the system is made up of several units of different applications, the chart will split heating and cooling per application-type.

Electrical energy usage per hour

The energy usage per hour shows in detail the actual and predicted energy consumption of the system as well as the ambient temperature over the report period. The chart shows the effect of the ambient temperature on the energy consumption and the hours where savings are achieved compared to the predicted energy or the hours with excessive energy consumption compared to the predicted energy.

Ambient temperature occurrence

The temperature occurrence shows the number of hours during which a certain ambient temperature has occurred. It is helpful to take this into account when comparing the energy consumption and performance of a system for two different periods or when comparing the performance of two systems in different locations.

Energy per degree temperature

The energy consumption at different ambient temperature shows the consumed electrical and generated heating/cooling energy for each ambient temperature that occurred during the report period. The graph helps in localizing the temperatures where most energy is used and where the optimization should be focused on.

Average COP during report period

The average COP during the report period shows the cooling and heating COP.

COP per degree temperature

The COP at each occurring ambient temperature shows a more detailed report of the heating and cooling COP, averaged per degree temperature occurred during the report period.

If the system is made up of several units of different applications, the chart will split heating and cooling per application-type.

Depending on your system, the information in the pictures may vary

The report can also be accessed via ClimaCheck online, on the Energy Statistics page.

Contact Support@ClimaCheck.com, if you have questions how to activate access your energy report. If you wish to get started with ClimaCheck, fill out the from here in under.